iPhone Speaker Not Working? Here’s How To Fix It

By | January 14, 2022

You use your smartphone’s speakers all the time: to play music, listen to voicemails, make phone calls, and more. But what can you do if you think your iPhone speaker is not working?

Is there an iPhone speaker test you can use to check for problems? How can you fix your iPhone speakers? And how do you check if it’s not exposed to water?

In certain circumstances, you will have to visit Apple in person if your iPhone speaker is not working. But before you do that, we have a few tips to fix your iPhone speakers.

iPhone Speaker Test: How To Check If Your Speakers Are Working

How can you tell if you have a problem with your speakers (i.e., most likely a hardware problem) or with the volume? Before we get to some of the basics, narrow down the issue with this simple speaker test.

Connect your headphones by plugging them in or connecting via Bluetooth. If you can hear music through them but not when you disconnect them, there’s likely something wrong with your speakers.

There are two ways to check it. The first is to look at the symbol shown on your volume bar. Disconnect any headphones, then navigate to Settings > Sounds & Haptics (or Sounds on iPhone 6s and earlier) and turn it on Change with Buttons active (if not already). This lets you use the buttons on the left side of your iPhone to adjust the ringer volume instead of just the media volume.

Use those buttons to increase your volume, and one of three symbols will appear. Ringer (which looks like a speaker and means nothing is connected), the Bluetooth symbol (means the device is still connected), or headphones. If you see headphones, there may be something in your headphone jack. In that case, you will have to clean it up, which we will come to.

Or, start playing music in the Music app and tap the AirDrop symbol at the bottom center of the interface. This will tell you where the music is playing.

Lastly, below Ringers And Alerts (in Settings > Sounds & Haptics), move the slider up or down. You should hear your ringtone, even if your device is in silent mode. If you don’t hear anything, something must be wrong. You may need to visit your local Apple store.

If you can hear sound, even if it’s distorted, you might be out of luck.

iPhone Speaker Not Working? Basic Troubleshooting

There could be many reasons why your iPhone speaker is not working, so let’s start by checking some basics.

Make sure your iPhone is not in Silent it is a switch to the top left of your device. If it’s positioned on the back of the device (showing orange), move it so it’s closer to the screen.

Make sure iOS is up to date by going to Settings > General > Software Update. This rules out all temporary glitches in the OS.

After this check, there is one more important strategy to repair your iPhone speaker: force restart. Rebooting your phone this way can clear minor software glitches. On iPhone 8 or later, press Volume Up quickly followed by Volume Down. Then press and hold Power until the Apple logo appears.

For iPhone 7, hold down the button Volume down and Power until you see the Apple logo. If you have an iPhone 6s or later, hold down the button Home and Power until you see the logo.

Give your phone time to reboot, then use the slider below Ringers and Alerts again to see if this solved the problem.

How to Check iPhone Bluetooth Device

Maybe your speakers are fine, but the sound is passing through other devices. If you have Bluetooth enabled, your iPhone might send everything to the handsfree unit in your vehicle, via AirPods, or something similar.

open Settings > Bluetooth to view a list of connections. Turn off Bluetooth headphones, speakers, or other devices you don’t want to play with.

You can also turn Bluetooth off altogether by pressing the button at the top. However, this will break other connections, such as smartwatches. Tap the connected device to disconnect it, or select i on the relevant device and select Forget This Device to prevent them from pairing up in the future.

How to Activate Speakerphone on Your iPhone

During a call, hold your device away from your face so that the screen lights up. Tap the icon Speaker at the top right of the grid. This will allow you to participate in conversations without holding your iPhone to your ear. If you are connected to a separate speaker via Bluetooth, a popup menu will appear, allowing you to choose where you want to hear the call audio.

Thanks For Visit

If you want all incoming calls to go through your speaker by default, go to Settings > Accessibility > Touch > Call Audio Routing. You can then switch from Automatic to Speaker or Bluetooth Headset. You can cancel this at any time; when you want to make a private call, press the icon Speaker on the grid to turn it off.

How to Clean Speaker your iPhone

Even the smallest bits of dirt can damage your smartphone. In some cases, dust can affect volume or, if it’s in the charging port, trick your iPhone into thinking it’s connected to an external device. It is very important that you keep all parts of your phone clean, but also that you are very careful when handling sensitive equipment.

Although effective, Apple cleaning instruction page recommend that you do not use an air compressor or canned air to clean your device. Soft lens cloths are generally best for light cleaning. If you have dirt stuck to it, try moving a soft-bristled toothbrush across the surface of the speaker. You can also use cotton buds in any niche.

Do not use any other liquid, including cleaning agents, as this can cause more harm.

How to Clean Water from Your iPhone Speaker

Liquid damage isn’t covered under Apple’s warranty, even with the water resistance of modern phones. This water resistance can weaken over time, which means you may need to dry the speaker in the event of an accident.

Don’t plug in your iPhone to charge if it’s wet. This can be a serious security threat and can destroy your phone.

Instead, stand your phone at an angle of about 45 degrees with the speaker facing down. Use a lint-free cloth to catch water droplets; other absorbent materials, including cotton balls, can further damage your device. If you feel that there is still water in any recess, gently tap your device with the charging port facing down. Consider placing it near a small fan to increase air circulation.

Despite what you may hear, you don’t have to seal your phone in a bag filled with rice. This can further damage the elements in your smartphone. However, you can try silica gel. You’ll often find these packs in a new pair of shoes, as they absorb moisture. Be careful using it around children or animals as it is dangerous if consumed.

How to Make Your iPhone Speaker Louder

What if there are absolutely no issues with your speakers, and you just want to make your iPhone louder?

An easy way is to place it on a more conductive surface. Wood or metal will take the vibe further. Placing your device in a bowl can also help. Such a curve works in a similar way to our ears by channeling sound in one different direction. By the same logic, don’t place your iPhone on anything that absorbs vibrations, like paper.

If you think your iPhone’s speakers aren’t enough, look for an external speaker system. Look best cheap bluetooth speaker for some great options.

What If Your iPhone Speaker Still Doesn’t Work

If you’ve done everything we suggested above, and your speakers don’t seem to be working, we have bad news. There’s likely something wrong with your phone, meaning you’ll need to book an appointment at the nearest Apple store.

Category: