How to Fix This PC Can’t Run Error on Windows 11

By | December 23, 2021

Read this article to find out how to fix This PC Can’t Run error on Windows 11. Recently Windows 11 has been released, and I’m sure many of you want to install it or want to upgrade from

However, in fact it is not so easy for those of you who want to just upgrade to Windows 11, it turns out that many of them experience an error that says This PC Can’t Run Windows 11 or your PC doesn’t meet the minimum requirements to run Windows 11, etc.

Read this article to find out how to fix the problem and how to install a new operating system without TPM and Security Boot.

Now available First built Windows 11 for members of the Windows Insider (Windows Insider Preview) program. However, most laptops or computers fail to meet the minimum requirements for this operating system because they do not have a component named TPM.

What is Windows 11 TPM?

TPM is the abbreviation of Trusted Platform Module. This module is used for data encryption, user authentication, hardware antivirus protection, and so on. Well, it’s possible that in Windows 11, it uses the TPM feature to encrypt your computer’s hard drive and reliably protect your data from unauthorized access. so now it’s clear huh, that in order to be able to use Windows 11 to your computer, you must have this TPM.

If you still have Windows 11 installed on your computer without it TMP 2.0, then you will get an error message “This PC Can’t Run Windows 11“. But forget about that error, because now I will show you a solution which disables TPM check and Security Boot.

How to Overcome TPM 2.0 Requirements and Secure Boot requirement in the installer registry

To Fix This PC Can’t Run Error first let’s start with simple things first. The first method, you only need an ISO image Windows 11. We’ll be disabling the TPM and Security Boot checks in the Registry before you actually start the installation from the pre-installation environment.

On modern versions of Windows it usually boots a minimal version of the operating system known as Windows Preinstallation Environment. That is to say it will load a set of necessary drivers for a particular laptop or computer and then launch the main installation.

At this stage of the installation, you can edit the registry so that the installation will never check the computer for TPM and Security Boot. Here’s how you can do it:

Notes: Make sure you have an empty drive to install the operating system on.

The first step you must have an ISO file Windows 11 bootable. And you should have no trouble making it bootable. However, if some of you still don’t know how to make it bootable, you can find an ISO image of this operating system on the internet.

If you have prepared a pen drive in which the operating system is already loaded Windows 11, then you must first create a file REG to disable the TMP check.

  • Right click on desktop, select New and click Text Documents.
  • Copy and paste the code below in the text document.
Windows Registry Editor Version 5.00
  • File REG it is used to add a key to the registry editor that will help you pass the check TPM 2.0 and Security Boot. Also, you can continue installing Windows as if nothing happened.
  • Save the file or document and then you change the extension from .txt Becomes .reg. for example you will save the file with the name Win11.reg.
  • Next file .reg the one you just created should be copied to where the bootable drive contains Windows 11 and you can copy it directly to the root folder.
  • When you boot from the installation USB drive, at the stage of selecting the language, time format and input method, you press the shortcut key Shift + F10 to open Command Prompt.
  • Once the Command Prompt window opens, type notepad.
  • In the Notepad window, then click File and select Open.
  • Select “all Files” in the file type menu, highlight the mouse over the .reg file you have created, right click on it and select “Merge“.
  • In the warning window, click Yes then OK. After that, close the notepad and Command Prompt windows, and continue the installation.

How to add Registry settings manually

If you don’t want to bother to create a .reg file, you can do it manually.

  • In this first stage, I assume you are already in the 6th sequence as above.
  • In the Command Prompt window, you type regedit then Enter.
  • Then follow the path below as a guide in the Registry editor.


  • Right click on the Setup folder, select New / Key and give it a name LabConfig.
  • Select LabConfig, and on the right side of the window, right click select New / DWORD (32-BIT) value and give it a name BypassTPMCheck. Open it and set the value data value to “1, then click OK.
  • Create Value again, right click select New / DWORD (32-BIT) value and give it a name BypassSecureBootCheck. Open it and set the value data value to “1, then click OK.

Now close the Registry window and continue the installation.

How to install Windows 11

The following is a clean way to install Windows 11, meaning that your computer already supports Windows 11. However, even if your laptop doesn’t support it, and you want to install it by not using TPM, it will be as below how to install it. Therefore, if you are one of the first to install Windows 11 on a laptop, here’s how:

windows 11 setup options

1. Select a language, time and currency, and a different keyboard from the default options, then select Next.

windows 11 install now

2. Click Install Now.

windows 11 product key

3. Enter the Product key or you can press “I don’t have a product key“. Then click Next.

windows 11 select edition

4. Select the Windows 11 version (the selection must match the version that the product key has activated).

5. Check on “I accept the Microsoft…and so on” To accept the license agreement, and click Next.

windows 11 usb options

6. Select Install Custom (for Windows Install only).

Windows 11 select target drive

7. Select the installation drive (Drive 0 Unallocated Space) and click Next.

8. The next stage you will complete the steps, setup will install a fresh copy of Windows 11 on your computer.

install windows 11 region

9. Next select your country or region and click Yes.

install windows 11 keyboard layout

10. Select the keyboard layout settings you want to use. And click Yes.

windows 11 skip keyboard layout

11. Choose “Skip” if you don’t want to set the layout.

12. Next connect your internet to wifi (if you have wifi).

windows 11 name PC

13. Confirm the name to be created for your PC and click Next.

windows 11 personal setup

14. Select for “Set up for personal use” in Windows 11 Pro. If you are using Windows 11 Home, this option is missing. And click Next.

windows 11 create account

15. Input Microsoft account you to create an account.

16. Input password then click Next.

windows 11 create pin

17. Select button “Create PIN“.

windows 11 setup login pin

18. Create a four-digit PIN to enter without a password.

windows 11 setup new device

19. Choose “Set up as a new device” and click Next.

windows 11 privacy settings

20. Next in the window “Choose privacy settings for your device”, you can enable or disable privacy settings as you wish. And click Next.

windows 11 custom experience

21. Choose your interests to help customize Windows 11 recommendations or, you can click “Skip“.

windows 11 backup with onedrive

22. Click the option “Back up my files with OneDrive” to automatically upload Desktop, Documents, and Pictures folders to the cloud. Or you can select the option “Don’t back up my files” to save your file on your device. And click Next.

skip microsoft 365

23. Click the button “No, thanks” to skip the installation for Microsoft Office. And “Try for free” if you have an Office subscription.

Final. After you complete the steps above, the process will continue and complete the computer setup automatically. Congratulations, your Windows 11 Install stage is complete.

How to Upgrade Windows 10 to Windows 11 without TPM

If you want to upgrade to Windows 11 from a copy of Windows 10 that you are already using, and you get errors or incompatibilities, there is one file that you must replace in the ISO file. To get there, of course you need a Windows 10 image or a bootable ISO file that we mentioned above.

Note: I assume you already have 2 files or an OS that is ready to be installed.

  1. Open the Windows 11 bootable flash drive in the file explorer that you created.
  2. So that you don’t get tired if you have to go back and forth, it’s a good idea to open Windows 10 in a new window.
  3. Now in the Windows 10 file, copy the .dll file with the name “appraiserres.dll” to the Windows 11 files folder, and select Replace the file in the destination.
  4. After the change, run Setup.exe and upgrade your Windows safely. If you did everything right, your upgrade to Windows 11 will go smoothly, without having to check your laptop or computer for TPM 2.0 and Security Boot.


That’s How to Fix This PC Can’t Run Error on Windows 11 on a laptop or computer. If you have any questions about this article. please provide suggestions in the comments column. thank you