How to Exit Aptio Setup Utility (For Laptop Owners)

By | December 29, 2021
How to Exit Aptio Setup Utility (For Laptop Owners)

How to Exit Aptio Setup Utility - When the laptop becomes sluggish and can’t boot, usually Windows will point to Aptio Setup Utility. If this has happened, then the user will find it difficult to get out of this condition.

But fortunately there is still a way out of the aptio setup utility that laptop owners can try.

Let’s review it to the end.

Aptio setup utility is all the configurations available on all types of Windows laptops. This utility is installed on every laptop so that users can access the BIOS.

Later, this configuration can save various important configurations for use by the device. So in other words, the aptio setup utility is an important part of a laptop.

Although it has an important role, unfortunately many laptop users (especially Asus) report having problems with the aptio setup utility. If this problem already appears, usually the user cannot return to his original location, even though he has pressed the escape key many times.

Well, for users facing the same problem, try some of the following solutions:

1. Restart Computer

How to Exit Aptio Setup Utility (For Laptop Owners)

The easiest way to get out of the aptio setup utility is to restart it. According to some users, this is the simplest and most powerful way to get the laptop out of the aptio setup utility. Although this method is risky to lose data that has not been saved, but this method is quite effective.

The process is easy, just press the button Power for a long time until the laptop turns off.

Next, restart the laptop or PC until it turns on again.

After that the laptop should go straight to the main Windows. But if this doesn’t happen, then try turning off the laptop again and removing the existing battery or power. Wait a few moments before turning the device back on.

2. Ensure Hard Drive Connected

How to Exit Aptio Setup Utility (For Laptop Owners)

One of the reasons that users cannot exit the aptio setup utility is because the hard drive is not properly connected or loose. So, the way out of the aptio setup utility that can be done is to re-check all connections to the device.

Some connections that usually cause users to not be able to exit this system configuration are the motherboard, flash disk, and hard disk. Therefore, when connecting a hard drive to a laptop, make sure the connection is correct.

3. Setting Aptio Setup Utility Settings

How to Exit Aptio Setup Utility (For Laptop Owners)

If all connections have been checked and the laptop still goes straight to the aptio setup utility, then the device may not recognize the SSD or HDD. Or it could be that the hard drive used is not recognized by the PC used. If this happens, then try setting the aptio setup utility.

First, choose the menu Security and press Expand to see the options on the menu. In this section, make sure that the boot settings are disabled. Next, restart to return to the aptio setup utility display.

When it’s back on, don’t forget to turn it off Secure Boost as well as Fast Boot. Also, don’t forget to activate CSM so that the hard drive in use can be detected by the device.

Next, try pressing Escape to exit the configuration. If everything is done correctly, then this method should be able to get the user out of the aptio setup utility.

Other Interesting Info: How to Flash Laptop BIOS Correctly, Check it out!


4. Changing OS or BIOS Options

How to Exit Aptio Setup Utility (For Laptop Owners)

If you have tried pressing Escape many times, but it doesn’t work, so try to enter the menu Advanced. Then select the tab Security to change settings OS or BIOS that is in the system.

First, choose an option Advanced Settings and then OS Selection. Furthermore, Anti OS be other options like Legari OS. If it is successful, then click Exit and save those changes.

If you have successfully saved these changes, then select the menu Reset in the menu section. Supposedly, the laptop will immediately restart and immediately return to the main page.

Other Interesting Info: How to Eliminate Windows 10 Test Mode

5. Reset BIOS Settings

How to Exit Aptio Setup Utility (For Laptop Owners)

If all the ways to get out of the aptio setup utility above have been tried but still don’t work, then the next option is to reset the BIOS settings. This method is indeed risky, but the potential for exiting the aptio setup utility is greater and definite.

Well, for those who want to get out of the aptio setup utility, open the menu Arrangement.

Next, select the tab Reset Configurationi and press part Factory Reset. By selecting this option, the BIOS will immediately return to the initial settings. Don’t forget to save these se
ttings and restart the laptop again.

Other Interesting Info: How to Overcome Windows Update Errors on Windows 10, Check it out!

6. Reinstalling Windows

How to Exit Aptio Setup Utility (For Laptop Owners)

Another way that also has a high chance of success is to reinstall Windows.

However, before taking this step, owners must know that one of the risks that can occur is the existence of lost or deleted data. So, before doing this step, make sure you are willing to lose some of the data on the device.

When reinstalling Windows, make sure all the steps are done correctly. This is to avoid the occurrence of errors again. If in doubt or not sure how, then it’s a good idea to use the services of a professional.

If there are no problems, then the way out of the aptio setup utility is simply by pressing the button Escape or Exit on the menu. However, problems will arise when this method doesn’t work despite finding it many times. If that happens, don’t panic and do one of the steps above.

Do it one by one correctly to be successful. If all the ways have been done but have not succeeded, then the option Restart Settings as well as Reinstall is the ultimate solution.

Hope it is useful.

Category: